Mobile base instructions

STEP 1: Affix cord wraps using the screws provided.

STEP 2: Lay cabinet on the mobile base and align holes in the base with 4 holes in the bottom of the cabinet. There is no need to remove rubber feet from the bottom of the cabinet. Attach using screws and washers into the pre‐threaded holes in the bottom of the cabinet.

Screw with large washer

STEP 3: Attach handles with screws and large washers. Reach in above shelf with the door open. The handle can be top or back‐mounted, whichever preferred, as shown here.

top‐mounted

back‐mounted