Build your expertise any time, anywhere.
With self-paced elearning from Baxter, convenient training is on demand 24/7.
Learn on your schedule.
Begin a session and come back to it later. Repeat it as often as you want. With self-paced elearning, you can count on consistent, high-quality training any time, every time.
Get involved.
Go deep with interactive graphics and product simulations that come as close to hands-on as possible.
Test your knowledge.
Be confident in your training with progress tracking and assessments.
Beds and Patient Mobility
-
AFFINITY Birthing Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
CAREASSIST & ADVANTA 2 Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
CENTRELLA Smart+ Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
COMPELLA Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
P8000 Stretcher Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
PROGRESSA Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
TOTALCARE Bariatric Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
VERSACARE Bed Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
Diagnostics and Examination
-
CIWS 8000 Series - CONNEX Integrated Wall System - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing, maintaining and calibrating the CIWS.
-
Connex 360 - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing and maintaining the Connex 360.
-
CP 150 Electrocardiograph - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing and maintaining the CP 150 ECG and is divided into 7 self-paced modules.
-
CSM 7000 Series - CONNEX SPOT Monitor - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing, maintaining and calibrating the CSM.
-
CVSM 6000 Series - CONNEX Vital Signs Monitor - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing, maintaining and calibrating the CVSM.
-
ELI 150c and ELI 250c Electrocardiographs - Repair Training
keyboard_arrow_downThis program is designed for individuals responsible for troubleshooting, repairing, and maintaining the ELI 150c and ELI 250c.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
ELI 280 Electrocardiograph - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing and maintaining the ELI 280 Resting Electrocardiograph (ECG).
-
ELI 380 Electrocardiograph - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing and maintaining the ELI 380 Resting Electrocardiograph (ECG) and is divided into 6 self-paced modules.
-
Pro-BP 3400 Series - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing, maintaining and calibrating the CONNEX ProBP 3400.
-
SPOT Vital Signs 4400 - Full-Service Training
keyboard_arrow_downThis training course is designed to train Biomedical Equipment Technicians on servicing and maintaining the SPOT Vital Signs 4400 Device.
Infusion Therapies and Technologies
-
SPECTRUM IQ Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for testing and maintaining the facility’s Baxter equipment. Upon completion, the participant will return with the knowledge necessary to keep the devices properly tested and maintained.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
SIGMA Spectrum Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for testing and maintaining the facility’s Baxter equipment. Upon completion, the participant will return with the knowledge necessary to keep the devices properly tested and maintained.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
NOVUM IQ Syringe Pump Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for testing and maintaining the facility’s Baxter equipment. Upon completion, the participant will return with the knowledge necessary to keep the devices properly tested and maintained.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
-
NOVUM IQ LVP Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for testing and maintaining the facility’s Baxter equipment. Upon completion, the participant will return with the knowledge necessary to keep the devices properly tested and maintained.
This course is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
Surgical Equipment and Technologies
-
Advance Table Preventive Maintenance Training
keyboard_arrow_downThis program is designed for individuals responsible for maintaining the facility’s Baxter equipment. Upon completion, the participant will have the product knowledge necessary to keep the patient care areas functioning at their required levels.
This page is for U.S. customers only.
If your country is not listed, please contact your local service representative for available offerings.
Hear from your fellow online learners
Hear from your fellow online learners
“We have had staff leaving and it has helped us to maintain our service targets. It was very helpful to not pull staff away on training days.”
— Online course trainee
Frequently Asked Questions
-
How can I sign up for self-paced elearning?
keyboard_arrow_downClick on the “Enroll Now” button under the Product you are interested in.
-
How much time do I need to reserve for the self-paced elearning?
keyboard_arrow_down- Please see the time allocation listed for each product under the course title.
- These times are an estimation and depend on whether you will be able to focus completely on the training and are based on a situation where you have all the test tools readily available. All courses will take the same amount of time.
- You can access the training at anytime, 24/7/365.
-
How long can I access the training material after self-paced elearning is complete?
keyboard_arrow_downThe training material is accessible to for the duration of your certification period, which is two years. Your completed learning is listed in your Learning History tile.
-
I have a Gold License for my WELCH ALLYN Service Tool and had to replace my computer. How do I move my old license to my new computer?
keyboard_arrow_down- The license activation code can only be used once, so for the new computer, you will need a new code.
- If your WELCH ALLYN certification period has not yet expired, please send an email to [email protected], explaining why you need a new activation code. Please list the current license activation code and your training user ID.
- Please note that you’re only eligible for this license support if you have completed the original training and have received your training certificate.
Need Help?
For assistance with your technical training needs, contact a Baxter Technical Training Support representative.
Email: [email protected]
